SYLLABUS
Contact Information:

Time	Thursday: 2:00 PM - 3:15 PM (Classroom Lectures) Tuesday:  2:15 PM - 3:45 PM (Guest Lectures)
Place	Lecture: 203 Simrall Guest Lectures: George Eastman Auditorium (Swalm) Meetings: Simrall 206 Labs: Simrall 323
Instructor	Joseph Picone Office: 413 Simrall Office Hours: 8-9 TR (others by appt.) Email: picone@cavs.msstate.edu
Class Alias	ece_4522@cavs.msstate.edu
URL	http://www.cavs.msstate.edu/research/isip/publications/courses/ece_4522
Required Textbook(s)	G. Voland, Engineering By Design, Addison-Wesley, 1999, ISBN 0-20-14985-10.
Prerequisite	Successful completion of Senior Design I (ECE 4512)
Reference Textbook(s)	P. Horowitz and W. Hill, The Art of Electronics, 2nd Edition, Cambridge University Press, 1994, ISBN: 0-521-37095-7. D.C. Hanselman and B.L. Littlefield, Mastering MATLAB: A Comprehensive Tutorial and Reference, 1/e,, Prentice-Hall, 1996, 542 pp., ISBN: 0-13-191594-0.

Grading Policies:

Grades are calculated using the following weights:

Team Leader		Team Member
Preliminary Hardware Review	10%	Preliminary Hardware Review	10%
Design Document	10%	Design Document	10%
Preliminary Design Review	10%	Preliminary Design Review	10%
Design Review	10%	Design Review	10%
Web Site	10%	Web Site	10%
Peer Review	25%	Peer Review	25%
Instructor Evaluation	25%	Advisor Evaluation	25%

I would thoroughly enjoy assigning letter grades according to the following distribution:

A	100 - 90
B	89 - 80
C	79 - 70
D	69 - 60
See you next semester	Below 60

Of course, if I was able to grade according to this distribution, it would be a first for a "Picone class."

Description:

The goal of our two semester sequence is to provide you with a realistic design experience, and teach you the tools and methodologies that can help you be successful at this endeavor. To be considered for a passing grade in this portion of the class, your design review must convince the committee this project was finished. You must demonstrate to functional project at your design review, and that your hardware design meets your design requirements and simulation results.

The design document is a comprehensive description of the entire project including: requirements, test specification, design, and test certification. It presents simulation data demonstrating that your design is feasible, and addresses most of the points listed on the cover page of the course web site. For Senior Design II, the design document will build on the document generated in Senior Design I.

The design document must clearly state which portions of the team project were executed by which members. Each member is expected to contribute a section describing their contributions. Individual grades for each member will be assigned based on the contributions described in these sections. Of the 20% allocated to this portion of the grade, 15% will come from your individual contribution, and 5% from the overall grade on the document.

The preliminary design review should be a dry-run of the final presentation. It is a 12-minute presentation by one team member that reviews project, followed by a 5-minute demonstration of your hardware. At this presentation, any deficiencies that are documented must be rectified in your final design review.

The design review is the big enchilada. You must address all design deficiencies noted in your preliminary review, and review all aspects of the project (with technical details supporting your claims). It is also a 12-minute presentation followed by a 5-minute demo. At the time of the design review, a project web site must be available containing all information about the project, including the documents described above and the design review presentation.

Team members will also submit a written evaluation of their fellow team members. This will include a chance to recommend individual grades for their team members, and comment on each member's contribution to the project. All claims of mutiny, insurgency, poor performance, etc., must be documented in sufficient detail to be given consideration. Team leaders will participate in a performance review conducted by the instructor during finals week. Faculty advisors will submit evaluations of each team member as well.

Schedule:

Class	Date	Topic(s)
1	01/11	Organization and Introductions
2	01/18	Project Overviews / Design Cycle
3	01/23	Troy Stovall, President, Gulf South Capital, Inc.
4	01/30	Gerald Nelson, COO, Deka Medical
5	02/08	Project Meetings
6	02/13	Robert Compton, founder, CID Venture Partners
7	02/20	Charles Doty, President, Lextron
8	02/27	Preliminary Design Review
9	03/06	Mark Rogers, President, SmartSynch
10	03/20	Don Roberton, CEO, Madison River Telecommunications
11	03/27	Fred Carl, President, Viking Range
12	04/03	David Bailey, Owner, United Support Systems
13	04/12	Project Meetings
14	04/17	Sam Lee, Owner/President, Infinity Capital
15	04/24	Design Review
16	05/01	Project Deliverables

Deliverables:

Item	Date	Description
1	02/13	Preliminary Hardware Review
2	02/20	Preliminary Design Review: Presentation
3	02/27	Preliminary Design Review
4	04/03	Design Document: Hardware Test Verification
5	04/10	Design Document
6	04/17	Design Review: Presentation
7	04/24	Design Review
8	05/01	Web Site