SYLLABUS
Contact Information:

Time	Thursday: 2:00 - 3:15 PM
Place	Lecture: 203 Simrall; Lab: Anywhere and Everywhere
Instructor	Joseph Picone Office: 413 Simrall Office Hours: 8-9 MWF (others by appt.) Email: picone@cavs.msstate.edu
Class Alias	ece_4512@cavs.msstate.edu
URL	http://www.cavs.msstate.edu/research/isip/publications/courses/ece_4512
Required Textbook(s)	G. Voland, Engineering By Design, Addison-Wesley, 1999, ISBN 0-20-14985-10.
Prerequisite	Credit or registration in an ECE technical elective; approval of a project proposal by your advisor.
Reference Textbook(s)	P. Horowitz and W. Hill, The Art of Electronics, 2nd Edition, Cambridge University Press, 1994, ISBN: 0-521-37095-7. D.C. Hanselman and B.L. Littlefield, Mastering MATLAB: A Comprehensive Tutorial and Reference, 1/e,, Prentice-Hall, 1996, 542 pp., ISBN: 0-13-191594-0.

Grading Policies:

Grades are calculated using the following weights:

Team Leader		Team Member
Requirements Document	10%	Requirements Document	10%
Test Specification	10%	Test Specification	10%
Preliminary Design Review	10%	Preliminary Design Review	10%
Simulation Certification	10%	Simulation Certification	10%
Design Document	10%	Design Document	10%
Design Review	20%	Design Review	20%
Web Site	10%	Web Site	10%
Team Journal	10%	Team Journal	10%
Performance Review	30%	Peer Review	10%

I would thoroughly enjoy assigning letter grades according to the following distribution:

A	100 - 90
B	89 - 80
C	79 - 70
D	69 - 60
See you next semester	Below 60

Of course, if I was able to grade according to this distribution, it would be a first for a "Picone class."

Description:

The goal of our two semester sequence is to provide you with a realistic design experience, and teach you the tools and methodologies that can help you be successful at this endeavor. To be considered for a passing grade in this portion of the class, your design review must convince the committee this project is ready for the fabrication stage (the following course in the two-course sequence). You also must convince the committee that you have done a sufficient amount of simulation of your system.

The requirements document defines the design constraints from a user-level perspective. It is a four-page document (approximately 2000 words) that assigns numbers to the design constraints so that these can be cross-referenced by other documents.

The test specification is a four-page document that defines the measurements to be used to verify the design, and the experiments that need to be constructed to conduct these measurements. It will assign numbers to each test needed to be performed so that these can be cross-referenced later.

The preliminary design review should be a dry-run of the final presentation. It is a 15-minute presentation by one team member that reviews project as you expect it to progress through the end of this semester. At this presentation, any deficiencies that are documented must be rectified in your final design review.

The simulation certification is a four-page document that demonstrates that your design has met its constraints in simulation. MATLAB, PSPICE, and other such simulation tools are expected to be used to perform system-level simulations. Test specifications and design requirements must be cross-referenced and evaluated. More details on this document will be provided later.

The design document is a 10-page document (approximately 5000 words) that describes the approach you are using to solve the problem stated above, and cross-references the design constraints and test specification documents. It presents simulation data demonstrating that your design is feasible, and addresses most of the points listed on the cover page of the course web site.

The design review is the big enchilada. You must address all design deficiencies noted in your preliminary review, and review all aspects of the project (with technical details supporting your claims). It is also a 15-minute presentation. At the time of the design review, a project web site must be available containing all information about the project, including the documents described above and the design review presentation.

All team members receive the same grade for the above information. Team members will also submit a journal evaluating their fellow team members. This will include a chance to recommend individual grades for their team members, and comment on each member's contribution to the project. Team leaders, on the other hand, will participate in a performance review conducted by the instructor. Team leaders have an opportunity to receive extra credit, since in theory they are responsible for the success of the entire team.

Schedule:

Class	Date	Topic(s)
1	01/13	Organization and Introductions
2	01/20	The Design Process, Report Writing, Web Sites
3	01/27	How To Formulate Design Requirements
4	02/01	John Benedict, BellSouth, Project Management
5	02/10	Technical Presentations
6	02/15	Phillip S. Herron, Adtran, Co-Design
7	02/22	Eric Dowling, DSP Legal Services, Patents and Consulting
8	03/02	Preliminary Design Review
9	03/14	Steve Given, Skytel, The Engineering Process
10	03/21	Clyde Payne, OSHA, Health and Safety Issues
11	03/28	Larry Hand, Peavey, Manufacturing Products
12	04/04	Wayne Causey, Eric Brown, and Anthony Mangiaracine, Howard Industries, Product Certification
13	04/11	Ann Bell, MS State Human Resources, Benefits
14	04/18	Vince Allen, Cyclaw, Intellectual Property Issues
15	04/27	Design Review
16	05/05	Project Deliverables

Deliverables:

Item	Date	Description
1	01/24	Requirements Document (Preliminary)
1	02/04	Requirements Document (Final)
3	02/14	Test Specification
4	02/21	Design Document
5	02/28	Preliminary Design Review
6	03/14	Test Certification (Simulation)
7	03/21	Revised Design Document
8	03/28	Revised Test Certification (Simulation)
9	04/18	Final Presentation
10	04/25	Design Review Web Site Team Journals Peer Review